• Drawbar Eyes

    108 WELD-ON DRAWBAR EYE

    Accepts 3 1/2 in. (89 mm) round tubing.
  • Drawbar Eyes

    110 WELD-ON SLACK REDUCING EYE

    Designed for 2 1/2 in. (64 mm) round tubing.
  • Drawbar Eyes

    123 WELD-ON SLACK REDUCING EYE

    Designed for 3 in. (76 mm) standard channel or square tubing.
  • Drawbar Eyes

    20 WELD-ON EYE

    Designed for 3 in. (76 mm) standard channel or square tubing.
  • Drawbar Eyes

    205 WELD-ON DRAWBAR EYE

    Designed for rectangular tubing 2 in. x 4 in. (51 mm x 102 mm) and 4 in. x 4 in. (102 mm x 102 mm).
  • Drawbar Eyes

    21 WELD-ON DRAWBAR EYE

    – 35 degree “V” angle.
    – Weld tabs can be heated and bent +/- 10 degrees to accommodate installation requirements.
  • Drawbar Eyes

    22 WELD-ON DRAWBAR EYE

    – 30 degree “V” angle.
    – Weld tabs can be heated and bent +/- 10 degrees to accommodate installation requirements.
  • Drawbar Eyes

    23 WELD-ON DRAWBAR EYE

    – 45 degree “V” angle.
    – Weld tabs can be heated and bent +/- 10 degrees to accommodate installation requirements.
  • Drawbar Eyes

    305 WELD-ON DRAWBAR EYE

    Designed for rectangular tubing 2 in. x 4 in. (51 mm x 102 mm) and 4 in. x 4 in. (102 mm x 102 mm).
  • Drawbar Eyes

    8 WELD-ON EYE

    Designed for 2 1/2 in. (64 mm) round tubing.