e-405

405 Swivel Drawbar Eyes

Our 405 Swivel Drawbar Eyes are only to be used with Premier Front End Housings.  Bushings are not included.  Check out the Optional Accessories tab to access our selection of front ends which include the housing, bushings, and washer.
This Drawbar Eye is also Slack-Reducing! It can be used with Premier’s 500 Mechanical Slack Adjuster or  281 and 282 Air Service Chambers. Slack Reducing Eyes work to maintain a tight fit between the drawbar eye loop and pintle hook. The snug fit improves the ride & handling while reducing wear for increased service life. 
It has a maximum gross trailer weight of 90,000 lbs. and is available with either right-hand or left-hand threaded pushrods. Contact your local distributor today!

Category:

Description

MODELS

Model #Part #Parts Included
405L10004770405 Eye, 415A Pushrod, 400 Shoe, 375 Bolt, 375A Locknut, 416 Locknut, 208 Snap Ring, 525Jam Nut
405LL10004771405 Eye, 415AL Pushrod, 400 Shoe, 375 Bolt, 375A Locknut, 416 Locknut, 208 Snap Ring, 525L Jam Nut
405S10004772405 Eye, 415 Pushrod, 400 Shoe, 375 Bolt, 375A Locknut, 416 Locknut, 208 Snap Ring, 525 Jam Nut
405SL10004774405 Eye, 415L Pushrod, 400 Shoe, 375 Bolt, 375A Locknut, 416 Locknut, 208 Snap Ring, 525L Jam Nut
405SE10004773405 Eye, 415A Pushrod, 400 Shoe, 375 Bolt, 375A Locknut, 208 Snap Ring, 525 Jam Nut, 422 Sleeve Nut

405 SPECIFICATIONS

Maximum Gross Trailer Weight:90,000 lbs. (40,823 kg)
Maximum Tongue Weight:3,700 lbs. (1,678 kg)
Model #Drawbar Eye DimensionsUnit Weight
405L/LL2 3/8” ID, Shaft 2” OD x 12 1/4” L27.8 lbs. (12.6 kg)
405S/SL2 3/8” ID, Shaft 2” OD x 11 3/8” L27.1 lbs. (12.3 kg)
405SE2 3/8” ID, Shaft 2 1/4” OD x 13 1/8” L28.5 lbs. (12.9 kg)

ACCESSORY & REPLACEMENT PARTS

Model #Part #Description
20810001106Snap Ring
28110000116Air Chamber, Type 24
281J10000006Jam Nut (fits 281 & 282 Air Chamber Pushrods)
28210000122Air Chamber, Type 30
37510000346Bolt
375A10000347Locknut
4710000144Coupler
47L10000145Coupler, Left-hand threads
47SPL10000146Coupler
40010000009Shoe
41510004775Pushrod, 15 1/2" L (525 Ind.)
415A10004776Pushrod, 17 1/4" L (525 Ind.)
415L10004778Pushrod, Left-hand threads, 15 1/2" L (525L Ind.)
415AL10004777Pushrod, Left-hand threads, 17 1/4" L (525L Ind.)
41610001181Locknut
42210000013Sleeve Nut
50010000147Mechanical Slack Adjuster
52510000173Jam Nut (fits 415 & 415A Pushrods)
525L10000174Jam Nut (fits 415L & 415AL Pushrods)
1400810000056Wear Gage
1403210000075Wear Gage

REPLACEMENT PART SPECIFICATIONS

Model #LengthThreadInside Diameter
473 5/8 in.1 1/16 HEX
47L3 5/8 in.1 1/16 HEX
47SPL6 in.1 1/16 HEX
41515 1/2 in.Right-hand
415L15 1/2 in.Left-hand
415A17 1/4 in.Right-hand
415AL17 1/4 in.Left-hand
4162 in.
4222 in.
525Right-hand3/4 in.
525LLeft-hand3/4 in.

Optional Accessories

Compatible Couplings

Below are the Compatible Couplings, to see the full reference chart click here.
  • c-100
    Pintle Hitch & Couplings

    100 Slack Reducing Coupling Limited to Quantities on Hand Recommended Replacement: 1200

    The 100 Saf-Tite Slack Reducing Coupling features the …

  • C100 vehicle part
    Pintle Hitch & Couplings

    100-3 Slack Reducing Coupling Product Discontinued Recommended Replacement: 1300

    The 100-3 Saf-Tite Coupling has the same popular mounting bolt pattern as our 2300 and 370. …

  • c-100-4-2
    Pintle Hitch & Couplings

    100-4 Slack Reducing Coupling Limited to Quantities on Hand Recommended Replacement: 1400

    100PK Parts Kits are available for purchase while supplies last.
    <span data-sheets-value="{"1":2,"2":"The SAF-TITE 100-4H slack reducing coupling has the same popular mounting bolt pattern as our 2400H and 470H models. This coupling is easy to install and offers a maximum gross trailer weight of 110,000 lbs. to haul your heaviest of loads. The SAF-TITE 100-4H is the perfect pintle hitch ...

  • Pintle Hitch & Couplings

    130 Coupling

    <span data-sheets-value="{"1":2,"2":"Popular for dolly haul back, the 130 model is ideal for light-to-medium duty applications. Like many of our couplings, the 130 model features a strong strike-resistant latching system that is easy to maintain and operate. The 130 coupling offers a 30,000 lbs. maximum gross trailer weight and 20,000 lbs. latch capacity, making it perfect for all of your ...

  • c-150
    Pintle Hitch & Couplings

    150 & 150-1 Combination Couplings

    <span data-sheets-value="{"1":2,"2":"One of Premier Manufacturing's most unique and versatile couplings is our popular 150 combination coupling. Whether you need to pull a trailer with an eye or ball connection, the 150 coupling can do the job. Our patented side-swing latch helps prevent tailgate damage and keeps the profile compact. With a maximum gross trailer weight of 20,000 lbs. and ...

  • c-16
    Pintle Hitch & Couplings

    16 Pin & Clevis Coupling

    <span data-sheets-value="{"1":2,"2":"Premier's pin and clevis 16 model coupling is simple in design yet offers high pull capacity for its size. This model is often used for dolly haul back, industrial, and agricultural operations. The 16 pin and clevis coupling can even be mounted on the front bumper of tractors for emergency towing or recovery operations. With a maximum gross ...

  • c-160
    Pintle Hitch & Couplings

    160 Coupling

    <span data-sheets-value="{"1":2,"2":"With the same unique latching as our 150 model, the 160 coupling offers a compact profile for tight places. Ideal for dolly haul back and other light-to-medium applications, this product is perfect for all of your trucking needs. With a 30,000 lbs. maximum gross trailer weight and 5,000 lbs. latch capacity, you're sure to make great use of ...

  • 2072 Premier Part
    Pintle Hitch & Couplings

    2200/2200L Slack Reducing Coupling

    <span data-sheets-value="{"1":2,"2":"The 2200 model, like our ever-popular 270 coupling, features the most popular mounting bolt pattern in the industry. All of our 2000 series couplings offer exceptional latch strength, easy operation, and low maintenance. All 2000 series couplings can be operated with or without an air service chamber. With a maximum gross trailer weight of 100,000 lbs., the 2200 ...

  • c-2300-2
    Pintle Hitch & Couplings

    2300/2300EL Slack Reducing Coupling

    <span data-sheets-value="{"1":2,"2":"Popular with tanker fleet customers, the 2300 slack reducing coupling can be used throughout the industry. Like our 2200 model, the 2300 is also made from Permalloy for long life. As with all 2000 series couplings, the 2300 offers unsurpassed latch strength and can be operated with or without an air service chamber. Each coupling has a maximum ...

  • Premier Vehicle Part
    Pintle Hitch & Couplings

    240 Coupling

    <span data-sheets-value="{"1":2,"2":"Designed as a direct retrofit to the mounting pattern of our 135NT, the 240 coupling is the perfect choice for your hauling needs. The 240 is built with extra toughness and wear resistant that Permalloy users have come to expect. With a maximum gross trailer weight of 45,000 lbs. and 20,000 lbs. latch capacity, the 240 coupling is ...

  • c-2400
    Pintle Hitch & Couplings

    2400/2400EL Slack Reducing Coupling

    <span data-sheets-value="{"1":2,"2":"When installation and mounting is limited by bolt hole pattern, the 2400 slack reducing coupling may be the answer. Although one of the bottom three mounting holes must be used, you choose which one. This allows for maximum compatibility with existing mounting patterns. Popular with Pup and Dumps and Tanker applications, all 2000 series couplings can be operated ...

  • c-2400h
    Pintle Hitch & Couplings

    2400H/2400HEL Slack Reducing Coupling

    The 2400H slack reducing …

  • C240K Part by Premier
    Pintle Hitch & Couplings

    240K & 240KL Couplings

    <span data-sheets-value="{"1":2,"2":"The 240K/240KL coupling is a direct result of customer requests for a King T-22 pintle hitch hook replacement model. Utilizing customer input, this coupling was engineered with a time-tested latch system, which is used on many of our models. This strong, easy to operate, strike-resistant latch system is a proven performer within our product line. The pintle body ...

  • c-270
    Pintle Hitch & Couplings

    270 Slack Reducing Coupling

    <span data-sheets-value="{"1":2,"2":"Like the 2200, our 270 slack reducing coupling offers the most popular bolt mounting pattern in the industry. Low profile, wear-resistant Permalloy and quick, easy latching are features that have made the 270 standard with fleets around the world. This coupling must be used with an air service chamber. With a 90,000 lbs. maximum gross trailer weight and ...

  • C370 Vehicle Part
    Pintle Hitch & Couplings

    370 Slack Reducing Coupling

    The 370 slack reducing coupling is frequently used in dump and pup applications. Our popular 370 model offers users a low profile, high latch strength, and a Premalloy body for maximum wear. This coupling must be used with an air service chamber. With a maximum gross trailer weight of 90,000 lbs., our 370 coupling is perfect for medium-to-heavy duty hauling.

    <img ...

  • c-470 Premier car part
    Pintle Hitch & Couplings

    470 Slack Reducing Coupling Product Discontinued Recommended Replacements: 2400 & 2400EL

    Often used in the agricultural industry as well as tankers, the 470 slack reducing coupling offers a similar latching system as our 270, but with a different mounting pattern. This coupling must be used with an air service chamber. With a 90,000 lbs. maximum gross trailer weight and 12,000 lbs. latch capacity, this coupling is perfect for …

  • 480 premier clamp
    Pintle Hitch & Couplings

    480 Coupling

    <span data-sheets-value="{"1":2,"2":"One of our highest capacity, non-air couplings, the 480 coupling has high strength latch components that are strike-resistant and concealed within the coupling body. Conveniently located grease zerks provide for easy maintenance of internal components. With a maximum gross trailer weight of 130,000 lbs. and 30,000 lbs. latch capacity, the 480 coupling is ideal for all of your ...

  • Pintle Hitch & Couplings

    570 Slack Reducing Coupling

    When vertical clearance is at a premium, the 570 slack reducing coupling may be your solution. Our 570 offers a bottom mount air chamber, low profile, and strong latching system. An oil cup is provided to quickly and easily lubricate the latch. This coupling must be used with an air service chamber. We recommend our 281C. With a …

  • c-580
    Pintle Hitch & Couplings

    580 Coupling

    A long time …

  • C580J Vehicle Part
    Pintle Hitch & Couplings

    580J Coupling

    <span data-sheets-value="{"1":2,"2":"With the same rugged features of our 580, the 580J coupling offers a higher load rating and slightly different mounting pattern. Protected internal latch parts, easy lubrication, and easy of operation are trademarks of all our 80-series couplings. With a maximum gross trailer weight of 90,000 lbs., you'll be sure to find many users for this exceptional pintle ...

  • Premier vehicle part
    Pintle Hitch & Couplings

    690L/690R Drop Pintle Coupling

    Premier’s 690L Drop Pintle Coupling offers similar features to …

  • Pintle Hitch & Couplings

    780 Slack Reducing Coupling Product Discontinued

    D I S C O N T I N U E D  P R O D U C T – LIMITED QUANTITIES
    In stock quantities will be the last orders fulfilled.
    An extremely strong latching system, low profile and enclosed latch components are what stand out about our 780. Hidden from snow, ice and road debris, the 780’s latch …

  • 820ELA 1
    Pintle Hitch & Couplings

    820ELA Extended Life Coupling Assembly

    <span data-sheets-value="{"1":2,"2":"Featuring our new SAF-T-LATCH, the 820ELA coupling assembly offers an exceptionally safe, strong, and easy to use latch mechanism, Extended Life (EL) lubrication points, and the mosts popular bolt hole pattern in the industry. The latch mechanism includes a small auxiliary air cylinder that is connected to our 281 or 282 air chamber. This assists in ensuring the ...

  • c-890cl
    Pintle Hitch & Couplings

    890C Drop Pintle Coupling Product Discontinued Recommended Replacement: 990 Coupling

    890PK and 890PK-NH parts kits available for purchase while supplies last

    <span data-sheets-value="{"1":2,"2":"Premier's 890CL and 890CR drop pintle coupling offers a slightly different mounting pattern for compatibility with existing x-members. This product is not to be used or A-Dolly applications. Made with Premalloy, the 890C series offers a maximum gross trailer weight of 90,000 lbs., making it ...

Additional information

Eye Type

Related products

  • Premier Vehicle Part
    Drawbar Eyes

    245DB Bolt-On Drawbar Eye

    The 245DB Bolt-On Drawbar Eye is great choice for your trucking needs. With a maximum gross trailer weight of 100,000 lbs. and maximum tongue weight of 8,000 lbs., it is the perfect tool for all of your mid-to-heavy-duty applications.

  • E307 Vehicle Parts
    Drawbar Eyes

    307 Swivel Drawbar Eyes

    Premier’s 307 Swivel Drawbar Eyes are only to be used with our Front End Housings.  Bushings are not included.  Check out the Optional Accessories tab to access our selection of front ends which include the housing, bushings, and washer.  With a maximum gross trailer weight of 150,000 lbs., the 307 is perfect for a variety of heavy-duty …

  • Car part no. 110
    Drawbar Eyes

    110 Weld-On Slack Reducing Drawbar Eye

    The 110 Weld-On Slack Reducing …

  • Premier Part
    Drawbar Eyes

    300HD Bolt-On Drawbar Eye

    Premier’s 300HD Bolt-On Drawbar Eye  Premium Manufacturing that has the same 3” ID as our 300 Drawbar Eye. Our 300 uses 3/4” mounting hardware. Whereas, the 300HD uses 7/8” mounting hardware and has a higher tongue capacity. Check out the Optional Accessories tab below for bolt kit and wear gage information.