Accessories

The 100PK is your parts replacement kit for our 100 Series Saf-Tite Couplings. This includes models 100, 100-3, 100-4, 100-4H.

Premier’s Safety Chain Hangers are what much of the trucking, utility, and construction industry have been requesting for many years. A strong, reliable, and easy to install hanger system.
Available in two sizes and styles.

The 135PK is your parts replacement kit for our 135NT and 235NT couplings.

Coupling Hitch Balls designed exclusively to fit Premier’s 150 Coupling.

All sizes have 1 1/4 in. diameter shaft and come standard with a 1 1/4 in. nylon locknut (157).

Like our 165 Receiver, the 166 is also a single, solid steel casting, adjustable mount receiver, except it is used in 2 1/2 in. receiver-type connections.
It allows for three different vertical height positions for mounting Premier 150 & 160 couplings.

The 2000PK is your parts replacement kit for our 2200, 2300, 2300B, 2400, 2400H and 2880 couplings.

The 270PK is your parts replacement kit for our model 270 coupling.

The 344 Bushing is made of rubber and can be ordered for replacement in our 320 and 330 Hinge Assemblies. Rubber is our standard bushing material and is suitable for most applications.

The 344A Bushing is made of polyurethane and can be ordered for replacement in our 320 and 330 Hinge Assemblies. Polyurethane bushings typically yield 2 to 3 times the service life of rubber. They are ideal and highly recommended for use in off-road and/or severe applications.

The 370PK is your part replacement kit for our 370, 370B, 570 and 770 coupling models.

The 434 Bushing is made of rubber and can be ordered for replacement in our 430 Hinge Assemby. Rubber is our standard bushing material and is suitable for most applications.

The 437A Bushing is made of polyurethane and can be ordered for replacement in our 435 and 536 Front End Assemblies. Polyurethane bushings typically yield 2 to 3 times the service life of rubber. They are ideal and highly recommended for use in off-road and/or severe applications.

The 437AK Bushing is made of polyurethane and can be ordered for replacement in our 536BK Front End Assembly. Polyurethane bushings typically yield 2 to 3 times the service life of rubber. They are ideal and highly recommended for use in off-road and/or severe applications.

Used to connect the Air Chamber Pushrod to the Pushrod of Drawbar Eye.

A complete mechanical slack adjustment device intended for use with any Premier slack adjusting drawbar eye. The 500 is designed to be used in place of 281 or 282 air chambers. No plumbing of air lines and simple operation make for an easy install and minimal maintenance.

Premier’s Safety Chain Hangers are what much of the trucking, utility, and construction industry have been requesting for many years. A strong, reliable, and easy to install hanger system.

These individually packaged bolt kits make the hardware selection for your coupling and/or drawbar eye fast and easy.

All kits (except **159 & ***511) use coarse threaded Grade-8 fasteners and Grade-C crimp style locknuts, for a strong and secure coupling or drawbar eye mounting system.

* For use with non-air applications.
** 159 Kit has fine threaded Grade-8 fasteners, uses lock washers …

Premier’s Drawbar Guides act as an aid to operators when hooking up equipment. These guides are cast from high strength steel and are easily installed by welding to the rear cross member. Drawbar Guides can be purchased individually (left or right) and as a complete set.

To determine wear limits, Premier created Wear Gages that help judge the useful life of couplings /pintle hitches and drawbar eyes. Available as a complete kit or individually, these gages are easy to use and are a must for Maintenance Managers and safety personnel.
In accordance with Premier and the Federal Motor Carrier Safety Regulations, these were designed to identify …