207 SWIVEL DRAWBAR EYE

Our Swivel Drawbar Eyes are only to be used with our Front End Housings.

Description

MODELS

207L 2 3/8″ ID, shaft 2″ OD x 12 1/4″ L.
207S 2 3/8″ ID, shaft 2″ OD x 11 3/8″ L.
207SE 2 3/8″ ID, shaft 2″ OD x 13 1/8″ L.
207K 2 3/8″ ID, shaft 2 1/4″ OD x 11 3/8″ L.
Parts Included: 416/*416K Locknut and 208/*208SPL Snap Ring.
* For use with 207K only.

SPECIFICATIONS

Maximum Gross Trailer Weight: 90,000 lbs. (40,823 kg)
Maximum Tongue Weight: 2,500 lbs. (1,134 kg)
Inside Diameter: 2 3/8 in. (60 mm)
  • Front End Assemblies

    340S/340SA FRONT END HOUSING

    This front end housing was designed for use with our: 207S, 307S, 405S or 410S Swivel Drawbar Eyes ONLY.

    Accepts 3 in. (76 mm) standard channel or square tubing.

  • Front End Assemblies

    435/435A FRONT END HOUSING

    This front end housing was designed for use with our: 207S, 307S, 405S or 410S Swivel Drawbar Eyes ONLY.

    Accepts 2 in. x 4 in. (51 mm x 102 mm) rectangular tubing or standard channel.

  • Front End Assemblies

    536 FRONT END HOUSING

    This front end housing was designed for use with our: 207K, 207S, 307K, 307S, 405S & 410S Swivel Drawbar Eyes ONLY.
  • Front End Assemblies

    546 FRONT END HOUSING

    This front end housing was designed for use with our: 207SE, 307SE, 405SE, 407SE & 410SE Swivel Drawbar Eyes ONLY.
  • Front End Assemblies

    556 FRONT END HOUSING

    This front end housing was designed for use with our: 207SE, 307SE, 405SE, 407SE & 410SE Swivel Drawbar Eyes ONLY.
  • Front End Assemblies

    640S/640SA FRONT END HOUSING

    This front end housing was designed for use with our: 207S, 307S, 405S or 410S Swivel Drawbar Eyes ONLY.

    Accepts 2 1/2 in. (64 mm) round tubing.

Additional information

Eye Type